Alberta OHS Code · Online Course

Online Fall Protection Training for Alberta Workers

A self-paced course built around Alberta's working-at-heights rules. Finish it in about four hours on any device, and download your certificate and digital badge as soon as you pass.

Worker in a fall protection harness preparing for work at height in Alberta

Price

$89.95 CAD

Length

About 4 hours

Format

Online, self-paced

Pass mark

80%, 2 attempts

Certificate

Valid 3 years

Gold Seal

1 credit

Who Needs Fall Protection Training in Alberta

Under section 139 of Alberta's Occupational Health and Safety Code, employers and supervisors must protect a worker from falling when the worker could fall:

If a fall protection system has to be used, section 141 requires the employer to train the worker in using it safely before the worker goes into that area. In practice, that covers roofers, framers, ironworkers, scaffold and MEWP users, and utility, oil and gas, manufacturing and warehouse workers who go up ladders, platforms or structures as part of the job.

This course is written for Alberta. For work under another province's rules, or if you only need general awareness, the general Fall Protection Online Certification course may be a better fit.

What the Course Covers

The course has eight modules. It uses 3D-animated scenarios and real-world examples, and covers Alberta's Occupational Health and Safety Act and Code throughout.

  1. Getting StartedHow the course is laid out, and why fall protection training matters.
  2. Introduction to Fall ProtectionLegal requirements, who is responsible for what, worker rights, and fall protection plans.
  3. Fall Protection SystemsTravel restraint, fall arrest and fall restrict systems, and when each one applies.
  4. Warning Methods and Physical BarriersGuardrails, bump lines, safety nets and warning signs.
  5. Work Access Equipment and PlatformsLadders, scaffolds and MEWPs: how to inspect them and choose the right one.
  6. Fall HazardsUnprotected edges, slippery surfaces, and suspension trauma.
  7. Hazard ManagementAssessing fall hazards and choosing controls.
  8. Rescue PlanningSelf-rescue, assisted and mechanical rescue, and rescue equipment.

What the Alberta OHS Code Requires

Section 141(2) of the OHS Code lists what fall protection training must include: a review of current Alberta legislation, fall protection plans, the methods used at the work site, hazard identification, anchor selection, connecting hardware, the effect of a fall on the body, pre-use inspection, emergency response, and hands-on practice.

Online training covers the knowledge side, not all of it. The Code also requires practice in inspecting, fitting, adjusting and connecting equipment and in emergency response, plus a briefing on the hazards at your own site (section 141(3)). The employer has to arrange those. This course includes practical evaluation tools and guides supervisors can use to check workers on the hands-on items.

For a full walk-through of the Code, including when a fall protection plan is required and who is responsible for what, read our guide to fall protection training in Alberta. Our fall arrest vs travel restraint article explains how the two main systems differ.

Group Pricing for Crews

Training a whole crew? Buy seats in bulk and assign them to your workers:

SeatsDiscountPrice per seat
1 to 9None$89.95
10 to 245% off$85.45
25 to 4910% off$80.96
50 to 7415% off$76.46
75 to 9920% off$71.96
100 or more25% off$67.46

Prices are in Canadian dollars. Questions about team training? Contact us.

Fall Protection Training Questions

Is fall protection training mandatory in Alberta?+

Yes, wherever a fall protection system must be used. Section 141 of the Alberta OHS Code requires the employer to make sure a worker is trained in the safe use of the fall protection system before the worker goes into an area where one is required.

At what height is fall protection required in Alberta?+

Generally at 3 metres or more. Section 139 of the OHS Code also requires protection below 3 metres where there is an unusual possibility of injury, where a worker could fall into or onto a hazardous substance or object or through an opening, and for falls of more than 1.2 metres at a permanent work area.

How long is the course and how is it assessed?+

The course takes about 4 hours and is self-paced, so you can stop and resume. You need 80% on the final exam and you have two attempts to pass.

How long is the certificate valid?+

The certificate and digital wallet badge are issued as soon as you pass and are valid for three years. To renew, retake the current version of the course before your certificate expires.

Is online fall protection training enough on its own?+

No. The online course covers the knowledge part of the training. The OHS Code also requires practice in inspecting, fitting, adjusting and connecting equipment and in emergency response, plus a briefing on site-specific fall hazards. The employer arranges those, and the course includes evaluation tools supervisors can use for the hands-on check.

Do you offer group pricing?+

Yes. Discounts start at 5% for 10 to 24 seats and go up to 25% for 100 or more seats.

Get Your Alberta Fall Protection Certificate

About 4 hours online. Certificate and wallet badge as soon as you pass.

Enrol in Fall Protection Alberta →